MARS® Collapsible Tripod

SKU: AFB-0x00-Y
The collapsible tripod design enables rapid folding for convenient transport, utilising pin latches attached to the base that secure it firmly in place. The axle is easily interchangeable and comes in sizes of 100, 300, and 500 metres.

The collapsible tripod design enables rapid folding for convenient transport, utilising pin latches attached to the base that secure it firmly in place. The axle is easily interchangeable and comes in sizes of 100, 300, and 500 metres.

Related Products

ST-Mated-Single-Terminus-ST-Connectors-8
Universal Patch Panel 1RU, 1x16 Dual-D - AVP Maxxum Series
Patch Cord LC-LC Duplex OS2 LSZH 02m  
ST-Mated-Single-Terminus-ST-Connectors-8
Fibre Systems management guides are designed to route and protect the bending radius of the patch cords.  This accessory can be retrofitted to any 1RU panel without removing the pre-installed racks.
The G202-xxxUSM-6LC is a 6 Core Singlemode fibre cable with integrated LC connectors, supporting up to 2000 m at 10 Gbps. Built for durability with a TPU jacket, Kevlar reinforcements, stainless-steel armoured tube and braided shield, it includes captive dust caps and a patented aluminium protector for reliable use in harsh environments.
Fibre Systems Tactical cable reels provide a simple solution for deploying and retrieving fibre optic and communication cables. Available in Multimode and Singlemode options with various connectors.
ST-Mated-Single-Terminus-ST-Connectors-8
SC Singlemode Duplex Blue Adapter, Polymer Housing, Zirconia Sleeve, Maxxum Dual D Mount, ABS Dust Caps, Adapter Plate(s) and/or Hardware, Adapter Plate(s) and/or Hardware. Black and Blue MIS Colour-Code Caps included.  
US Conec IBC™ single fibre cleaners can be used to effectively cleans harsh environment 1.6 mm based connector systems; cleans through Glenair M38999 test adapters; compact size; includes retractable zipcord  
Cinch Fibreco Free Plug / Cable Mount Series 4 CH MIL Spec Connector SM 1310nm M83526/20-02
ST-Mated-Single-Terminus-ST-Connectors-8
Patch cord LC-LC DX OM4 LSZH lead 01M 2mm Aqua Low Loss
The rear compatibility of opticalCON MTP® chassis connectors fitting with standard MTP® breakout cables allows easy adaptation to fibre standard connectors such as LC, SC, ST. The approved dust shutter ensures high mating cycles and minimal maintenance.
ST-Mated-Single-Terminus-ST-Connectors-8
Fibre Systems CoreSpan™ Indoor/Outdoor LSZH distribution cables are designed for campus links between buildings where runs are short enough for installers to benefit from the lower termination costs of tight-buffered cable. For indoor use, the cable has an LSZH sheath.
ST-Mated-Single-Terminus-ST-Connectors-8
ST-Mated-Single-Terminus-ST-Connectors-8
ST-Mated-Single-Terminus-ST-Connectors-8
ST-Mated-Single-Terminus-ST-Connectors-8
The Shipboard LSZH fibre optic cable is engineered with a tight-buffered, water-blocked design and manufactured from high-quality low-smoke, zero-halogen materials. It complies with U.S. Department of Defence specification MIL-PRF-85045 and is supplied in 1, 4, and 8-fibre variants.
ST-Mated-Single-Terminus-ST-Connectors-8
Maxxum Single D Mount, D-Type Blank Cover Plate, Black, covers one position, Adapter Plate(s) and/or Hardware, MIS Black Color-Code Cap  
ST-Mated-Single-Terminus-ST-Connectors-8
ST-Mated-Single-Terminus-ST-Connectors-8
ST-Mated-Single-Terminus-ST-Connectors-8
ST-Mated-Single-Terminus-ST-Connectors-8
ST-Mated-Single-Terminus-ST-Connectors-8
Specialised cleaning kits to protect the performance of your fibre optic assemblies. Allows for the safe removal of oil, dust and other contaminants from fibre connections.
The LC fibre tip cap is a simple yet effective product designed specially for the rental and staging industry to protect the LC fibre tips, which can easily gather dirt and affect transmission performance. Put the leash on your cable and never worry about losing it again.
Pigtail LC 2M SM 657.A1 900um 12 colour LSZH
Beetek HDMI Fibre Extender is designed particularly for the rental & staging industry considering various parameters. The device can support resolution up to 4K@30 4:4:4 at 10.2 Gbps transmission rate. It uses single core Singlemode or OM3 fibre technology and support distance up to 300 metres. The device supports 40 dB input balancing at the TX to compensate for the loss generated by cable from the source to the TX. Built in EDID simulation and EDID learning support. The HDMI Extender support accurate pixel time reconstruction and provides no delay and no compression during the transmission. The device is carefully designed with protective enclosure for fibre interface and it is dust proof. It has rear long screws to support portable installation, locking power supplies and improved electrostatic protection. The product is suitable for Rental and Live Events.
ST-Mated-Single-Terminus-ST-Connectors-8
SC Multimode Simplex 10G, OM3/4 Aqua Adapter, Polymer Housing, Zirconia Sleeve, ABS Dust Caps, Adapter Plate(s) and/or Hardware. Black and Aqua MIS Colour-Code Caps included.  
ST-Mated-Single-Terminus-ST-Connectors-8
Marine and offshore tight-buffered cable design for use in installations requiring a flame-retardant, low-smoke and zero-halogen cable incorporating individual sub-cables for direct termination
ST-Mated-Single-Terminus-ST-Connectors-8
D-Series 2F MM OM1 Ultra-Fox Plus™ Outdoor Military Tactical Bk
ST-Mated-Single-Terminus-ST-Connectors-8
Fibre Systems specialises in fibre optic termination, offering standard and custom patch cord and pigtail assemblies with various connector types for both singlemode and multimode applications using qualified QPL cable.
ST-Mated-Single-Terminus-ST-Connectors-8
SC/APC Singlemode Simplex Green Adapter, Polymer Housing, Zirconia Sleeve, ABS Dust Caps, Adapter Plate(s) and/or Hardware. Black and Green MIS Colour-Code Caps included.  
ST-Mated-Single-Terminus-ST-Connectors-8
"Fibre Systems’ SMPTE 311M Hybrid Fibre cable delivers ultra-low-loss HD video, audio, and data in studio, portable, or harsh environments. High-strength CPE-coated fibres and polyethylene-insulated copper ensure durability, while the flexible, abrasion-resistant TPE jacket withstands indoor and outdoor use.

Need a Fibre Optic Solution?

Fibre Systems supports your industry with reliable, on-demand services for high-performance cabling. See what we can do for you today.