1RU Rackmount Sliding LC – Splice Configuration

D-Series 4F MM OM1 Ultra-Fox Plus™ Outdoor Military Tactical Bk

Fibre Systems CoreSpan™ Indoor/Outdoor LSZH distribution cables are designed for campus links between buildings where runs are short enough for installers to benefit from the lower termination costs of tight-buffered cable. For indoor use, the cable has an LSZH sheath.

Cinch Fibreco Free Plug / Cable Mount Series 4 CH MIL Spec Connector SM 1310nm M83526/20-02

AVP Maxxum ST Singlemode Simplex, (Metallic) Fibre Optic Panel Mount Feed-thru, Adapter Plate(s) and/or Hardware. Black, Blue and Green MIS Colour-Code Cap included  

LEMO’s range of panel-mount SMPTE internal hybrid distribution breakouts provide a streamlined solution for connecting to standard fibre optic connectors and 6-pin AMP power connectors. Engineered for easy integration into rack panels, splice trays, adapters, and wall boxes, these assemblies simplify installation while maintaining exceptional reliability.

The FXW and FMW series feature two single-mode fibres, two 22 AWG wires, and two 18 AWG tinned-copper conductors housed within a flexible PVC jacket and protected by a rugged braided sleeve. Designed to combine power, control, and fibre in a single assembly, they deliver robust performance for professional video and audio transmission. Fully compliant with ARIB and SMPTE standards.

Assemblies are available in both plug and receptacle configurations, with ST, LC, or SC fibre connectors, and offered in a range of standard lengths.

Hybrid-powered fibre cabling engineered to transmit power and data in one cable. Suitable for all environments, including indoor, outdoor, harsh conditions and cable trays.

Rackmount 1RU sliding enclosure SC Panels, Splice Configuration

US Conec’s IBC™ Eliminator™ Cleaning Fluid is designed specifically for fibre optic connector endface cleaning. It is a non-flammable, low odour cleaning fluid that helps to dissolve the stubborn debris found on some optical connector endfaces.    

Fibre Systems CoreSpan™ Indoor/Outdoor LSZH distribution cables are designed for campus links between buildings where runs are short enough for installers to benefit from the lower termination costs of tight-buffered cable. For indoor use, the cable has an LSZH sheath.

High-performance ARINC 801 compliant termini in M29504/4 & /5 style. Designed to fit MIL-DTL-38999 Series III, pin size 16 connectors; available in single & multimode applications.

Maxxum Dual D-Type Patch Panels accept Dual D-Type and Single D-Type modules. Maxxum Single D-Type Panels accept Single D-Type modules Only 1RU x 12 Way    

D-Series 24F SM Ultra-Fox Plus™ Outdoor Military Tactical Bk

Beetek HDMI Fibre Extender is designed particularly for the rental & staging industry. The device can support resolution up to 4K@60 4:4:4 at 18 Gbps transmission rate. It uses single-core multimode OM3 fibre technology and support distance up to 500 metres. The device supports 40 dB input balancing at the TX to compensate for the loss generated by cable from the source to the TX. Built in EDID simulation and EDID learning support. The HDMI Extender support accurate pixel time reconstruction and provides no delay and no compression during the transmission. The device is carefully designed with protective enclosure for fibre interface and it is dust proof. It has rear long screws to support portable installation, locking power supplies and improved electrostatic protection. The product is suitable for Rental and Live Events.

Fibre Systems Tactical cable reels provide a simple solution for deploying and retrieving fibre optic and communication cables. Available in Multimode and Singlemode options with various connectors.

The M1-HDMI2.0 is an uncompressed, zero-frame delay HDMI singlemode fibre extender that transmits an HDMI 2.0 signal loss less up to 700 meters through a single LC fibre with resolutions up to 3840*2160@60Hz, and it has two-way 100M Ethernet and RS232 interfaces for two-way transmission of data and control signals, and new features include independent audio and embedded/de-embedded transmission. Full-featured HDMI interface supports pass-through EDID transmission, HDR, HDCP, ARC, CEC and 3D, plug and play. This product with locking power supplies and dust-proof fibre interface latches make signal connection more reliable. An optional 1U rack tray is available for mounting, making it suitable for long-distance HDMI signal transmission in a variety of environments.

HF-FUW & HF-FMW LEMO fibre camera cable assemblies comply with 304M & 311M SMPTE standards. With LEMO connectors for strong signals in tough broadcast settings, these cables include power, control, and fibre optic lines for video and audio. Assemblies are machine-polished, tested for <.55dB return loss, and can be custom ordered in any length or configuration.

Patch Cord LC-LC Duplex OS2 LSZH 02m  

The opticalCON system is based on LC-Duplex connectors but eliminates its weakness and guarantees a safe, dust protected and rugged connection. Being compatible to conventional LC connectors the opticalCON DUO offers the choice of using cost effective LC cables or the rugged opticalCON cable assembly for mobile applications. The opticalCON DUO is the ideal solution for equipment connections and system integration offering LC compatibility on chassis connector front and rear.

Compact DIN Enclosure ST 06 / 12 Port Patch Configuration  

Rackmount 3RU sliding enclosure SC Panels, Patch Configuration

Kimwipes are specially designed paper fibre optic cleaning wipes which can be used for cleaning laboratory equipment and instruments. Can be used in conjunction with Eliminator Fluid    

Fibre Systems Tactical cable reels provide a simple solution for deploying and retrieving fibre optic and communication cables. Available in Multimode and Singlemode options with various connectors.