IBC™ Cleaning Tool for MTP/MPO Connectors

Fibre Systems Tactical cable reels provide a simple solution for deploying and retrieving fibre optic and communication cables. Available in Multimode and Singlemode options with various connectors.

Fibre Systems Tactical cable reels provide a simple solution for deploying and retrieving fibre optic and communication cables, including SMPTE Cable.

US Conec hardened fibre optic connector (HFOC) space with the new, small-form-factor HEC-DC connector. Combining DirectConec™ push-pull simplicity, GR- and IEC-compliant reliability, and available Elite® MT ferrule performance, the HEC-DC is a versatile, IP68-rated connector solution enabling high density and high performance for applications ranging from Fibre to the Home (FTTH), to Fibre to the Antenna (FTTA), to industrial and military applications.

Fibre Systems Tactical cable reels provide a simple solution for deploying and retrieving fibre optic and communication cables, including SMPTE Cable.

The rear compatibility of opticalCON MTP^® 24 chassis fitting with standard MTP^® 24 (ELITE male with 20 N springforce) breakout cable allows easy adaptation to fibre standard connectors such as LC, SC, ST. The approved dust shutter ensures high mating cycles and minimal maintenance

Fibre Systems offers pre-terminated opticalCON DUO SMPTE chassis assemblies featuring a choice of SC , LC, ST or bare fibres for a straightforward plug-and-play installation. These solutions enable efficient breakout of opticalCON SMPTE Fibre Only installations.

The OCC MARS reel is compatible with deployable axials, A-Frames, cable cradles, transit cases, tripods, bumper mounts, backpacks (including those with fibre optic slip rings), and cartridge systems. It offers features like integrated cleaning kits, a flip-out handle, a 10mtr divider, connector cradle, stackable design, and lower weight than most reels.

Fibre Systems Tactical cable reels provide a simple solution for deploying and retrieving fibre optic and communication cables.

Beetek HDMI Fibre Extender is designed particularly for the rental & staging industry. The device can support resolution up to 4K@60 4:4:4 at 18 Gbps transmission rate. It uses single-core multimode OM3 fibre technology and support distance up to 500 metres. The device supports 40 dB input balancing at the TX to compensate for the loss generated by cable from the source to the TX. Built in EDID simulation and EDID learning support. The HDMI Extender support accurate pixel time reconstruction and provides no delay and no compression during the transmission. The device is carefully designed with protective enclosure for fibre interface and it is dust proof. It has rear long screws to support portable installation, locking power supplies and improved electrostatic protection. The product is suitable for Rental and Live Events.

Fibre Systems fibre optic adapters offer reliable performance with precision alignment sleeves. Housings come in various colours, with flange or flangeless options, metal clips and internal shutter for extra protection.

Fibre Systems management guides are designed to route and protect the bending radius of the patch cords.  This accessory can be retrofitted to any 1RU panel without removing the pre-installed racks.

"Fibre Systems’ SMPTE 311M Hybrid Fibre cable delivers ultra-low-loss HD video, audio, and data in studio, portable, or harsh environments. High-strength CPE-coated fibres and polyethylene-insulated copper ensure durability, while the flexible, abrasion-resistant TPE jacket withstands indoor and outdoor use.

Rugged Tight Buffered fibre optic cable designed for the harshest environments, designed to survive severe crush, impact, vehicle run-over and deployment and retrieval conditions.

Fibre Systems provides a full range of ODVA connectors engineered to surpass ODVA standards. With IP68-rated environmental sealing, these connectors deliver a cost-effective, user-friendly solution for industrial settings, Fibre to the Antenna (FTTA), and other demanding or harsh environments.

Patch Cord LC-LC Duplex OS2 LSZH 05m - Low loss  

"The Maxi series features rugged, field-ready expanded beam connectors with hermaphroditic design, ideal for harsh environments like military, avionics, offshore, broadcast, and mining. Available in 12, 14, or 16 optical channels in Singlemode or Multimode."

Patch Cord LC/APC-SC/APC Duplex OS2 LSZH 2mm Sheath Low Loss 0.5m

Patch Cord LC-LC Duplex OS2 LSZH 02m  

LEMO F2 fibre optic contacts are specialised, high performance, Singlemode or Multimode fibre contacts commonly used in #K.93C SMPTE Broadcast applications, 0K-5K and 2B-5B series connectors. They are designed for quick field repairs without epoxy or polishing, ensuring reliable, rapid, on-site termination.

Factory pre-terminated MPO/MTP cables, available in 8, 12, 16 or 24 fibre arrays in a single connector. Ideal for use in data centres and other high-density cabling environments.

AVP Maxxum ST Multimode Simplex, OM1/2/3/4 (Metallic) Fibre Optic Panel Mount Feed-thru. Adapter Plate(s) and/or Hardware. Includes MIS Colour-Code Caps; Black, Beige, Aqua & Magenta  

Fibre Systems fibre optic adapters offer reliable performance with precision alignment sleeves. Housings come in various colours, with flange or flangeless options, metal clips and internal shutter for extra protection.