Splice-on Connector MPO/MTP

Rackmount 1RU sliding enclosure SC Panels, Splice Configuration

AVP Maxxum LC/APC Singlemode Duplex Green, Fibre Optic Panel Mount Feed-thru, Green, SC Footprint, Adapter Plate(s) and/or Hardware, Black and Green MIS Colour-Code Caps included.  

D-Series 24F MM OM1 Ultra-Fox Plus™ Outdoor Military Tactical Bk

The KF4A is a highly advanced, All-In-One active cladding alignment fusion splicer, designed to perform the major 5 functions systematically: stripping, cleaning, cleaving, splicing and protecting. The Swift KF4A is the best fit for fusion splicing and fusion splice-on connectors (SOC) of FTTx network applications.

US Conec’s IBC™ Eliminator™ Cleaning Fluid is designed specifically for fibre optic connector endface cleaning. It is a non-flammable, low odour cleaning fluid that helps to dissolve the stubborn debris found on some optical connector endfaces.    

LEMO’s range of panel-mount SMPTE internal hybrid distribution breakouts provide a streamlined solution for connecting to standard fibre optic connectors and 6-pin AMP power connectors. Engineered for easy integration into rack panels, splice trays, adapters, and wall boxes, these assemblies simplify installation while maintaining exceptional reliability.

The FXW and FMW series feature two single-mode fibres, two 22 AWG wires, and two 18 AWG tinned-copper conductors housed within a flexible PVC jacket and protected by a rugged braided sleeve. Designed to combine power, control, and fibre in a single assembly, they deliver robust performance for professional video and audio transmission. Fully compliant with ARIB and SMPTE standards.

Assemblies are available in both plug and receptacle configurations, with ST, LC, or SC fibre connectors, and offered in a range of standard lengths.

Beetek HDMI Fibre Extender is designed particularly for the rental & staging industry considering various parameters. The device can support resolution up to 4K@30 4:4:4 at 10.2 Gbps transmission rate. It uses single core Singlemode or OM3 fibre technology and support distance up to 300 metres. The device supports 40 dB input balancing at the TX to compensate for the loss generated by cable from the source to the TX. Built in EDID simulation and EDID learning support. The HDMI Extender support accurate pixel time reconstruction and provides no delay and no compression during the transmission. The device is carefully designed with protective enclosure for fibre interface and it is dust proof. It has rear long screws to support portable installation, locking power supplies and improved electrostatic protection. The product is suitable for Rental and Live Events.

Advanced Lightweight Reel Stands (ALRS) provide a rugged, portable solution for cable deployment/retrieval. Features a tool-free setup with all pieces contained within the unit.

TACTICAL  LSZH, FLEX  SMPTE cable with OCC Ultra-Fox™ Plus deployable buffer system, combining triple thickness acrylate and hard elastomer for maximum fibre protection.

US Conec IBC™ single fibre cleaners can be used to effectively clean various single fibre connectors such as MDC, LC Duplex, LC and SC both residing in an adapter or faceplate and unmated.

SC Singlemode Duplex Blue Adapter, with Shutter. Polymer Housing, Zirconia Sleeve, Maxxum Dual D Mount, ABS Dust Caps, Adapter Plate(s) and/or Hardware, Adapter Plate(s). Black and Blue MIS Colour-Code Caps included.  

Rugged Tight Buffered fibre optic cable designed for the harshest environments, designed to survive severe crush, impact, vehicle run-over and deployment and retrieval conditions.

Each unit supports more than 525 cleaning operations and can be used to clean cable assemblies held in hand or connectors located behind panels, the IBC™ Cleaner features a cloth that won’t fray during use.  

Fibre Systems fibre optic adapters offer reliable performance with precision alignment sleeves. Housings come in various colours, with flange or flangeless options, metal clips and internal shutter for extra protection.

Fibre Systems works with Australian Dept of Defence and supports all areas of our military by providing our customers with the highest quality military grade tactical fibre optic cable solutions for the Department of Defence, Aerospace, Naval shipboard applications.

Fibre Systems fibre optic adapters offer reliable performance with precision alignment sleeves. Housings come in various colours, with flange or flangeless options, metal clips and internal shutter for extra protection.

AVP Maxxum LC Multimode Duplex Fibre Optic Panel Mount Feed-thru, Magenta, Adapter Plate(s) and/or Hardware. Black and Magenta MIS Colour-Code Caps included.    

The Shipboard LSZH fibre optic cable is engineered with a tight-buffered, water-blocked design and manufactured from high-quality low-smoke, zero-halogen materials. It complies with U.S. Department of Defence specification MIL-PRF-85045 and is supplied in 1, 4, and 8-fibre variants.

SC Multimode Simplex 10G OM4 Magenta Adapter, Polymer Housing, Zirconia Sleeve, ABS Dust Caps, Adapter Plate(s) and/or Hardware. Black and Magenta MIS Colour-Code Caps included.  

The Modular Advanced Reel System (MARS) is a lightweight, modular fibre deployment reel designed for rapid deployment and retrieval in harsh environments.

D-Series 6F MM OM1 Ultra-Fox Plus™ Outdoor Military Tactical Bk

SC/APC Singlemode Duplex Green Adapter. Polymer Housing, Zirconia Sleeve, Maxxum Dual D Mount, ABS Dust Caps, Adapter Plate(s) and/or Hardware, Adapter Plate(s) and/or Hardware. Black and Green MIS Colour-Code Caps included.  

Maxxum Single D Mount, D-Type Blank Cover Plate, Black, covers one position, Adapter Plate(s) and/or Hardware, MIS Black Color-Code Cap  

The Modular Advanced Reel System (MARS) is a lightweight, modular fibre deployment reel designed for rapid deployment and retrieval in harsh environments.