RIO Series MARS Reel c/w Integrated Fibre Optic Panel – 750 Metre

Beetek HDMI Fibre Extender is designed particularly for the rental & staging industry considering various parameters. The device can support resolution up to 4K@30 4:4:4 at 10.2 Gbps transmission rate. It uses single core Singlemode or OM3 fibre technology and support distance up to 300 metres. The device supports 40 dB input balancing at the TX to compensate for the loss generated by cable from the source to the TX. Built in EDID simulation and EDID learning support. The HDMI Extender support accurate pixel time reconstruction and provides no delay and no compression during the transmission. The device is carefully designed with protective enclosure for fibre interface and it is dust proof. It has rear long screws to support portable installation, locking power supplies and improved electrostatic protection. The product is suitable for Rental and Live Events.

Fibre Systems CoreSpan™ Indoor/Outdoor LSZH distribution cables are designed for campus links between buildings where runs are short enough for installers to benefit from the lower termination costs of tight-buffered cable. For indoor use, the cable has an LSZH sheath.

The M1-HDMI2.0 is an uncompressed, zero-frame delay HDMI singlemode fibre extender that transmits an HDMI 2.0 signal loss less up to 700 meters through a single LC fibre with resolutions up to 3840*2160@60Hz, and it has two-way 100M Ethernet and RS232 interfaces for two-way transmission of data and control signals, and new features include independent audio and embedded/de-embedded transmission. Full-featured HDMI interface supports pass-through EDID transmission, HDR, HDCP, ARC, CEC and 3D, plug and play. This product with locking power supplies and dust-proof fibre interface latches make signal connection more reliable. An optional 1U rack tray is available for mounting, making it suitable for long-distance HDMI signal transmission in a variety of environments.

Fibre Systems CoreSpan™ Indoor/Outdoor LSZH distribution cables are designed for campus links between buildings where runs are short enough for installers to benefit from the lower termination costs of tight-buffered cable. For indoor use, the cable has an LSZH sheath.

The OCC MARS reel is compatible with deployable axials, A-Frames, cable cradles, transit cases, tripods, bumper mounts, backpacks (including those with fibre optic slip rings), and cartridge systems. It offers features like integrated cleaning kits, a flip-out handle, a 10mtr divider, connector cradle, stackable design, and lower weight than most reels.

US Conec’s IBC™ Eliminator™ Cleaning Fluid is designed specifically for fibre optic connector endface cleaning. It is a non-flammable, low odour cleaning fluid that helps to dissolve the stubborn debris found on some optical connector endfaces.    

SC Singlemode Duplex Blue Adapter, with Shutter. Polymer Housing, Zirconia Sleeve, Maxxum Dual D Mount, ABS Dust Caps, Adapter Plate(s) and/or Hardware, Adapter Plate(s). Black and Blue MIS Colour-Code Caps included.  

GX design allows for indoor/outdoor installations using a single cable type. Supports multiple routing of multifibre sub-cables, with connectors terminating directly to the fibre.

Fibre Systems stocks a range of the Rugged PLC works with commercial, industrial, and military-tactical cables. It offers enhanced connector retention and metal latch arms for stronger LC port pull-out resistance.

Fibre Systems Tactical cable reels provide a simple solution for deploying and retrieving fibre optic and communication cables, including SMPTE Cable.

The rear compatibility of opticalCON MTP® chassis connectors fitting with standard MTP® breakout cables allows easy adaptation to fibre standard connectors such as LC, SC, ST. The approved dust shutter ensures high mating cycles and minimal maintenance.

Patch Cord LC-LC High Density reversible Uni-tab OS2 LSZH lead 01M - 2mm Yellow Low Loss

Cinch Fibreco Free Plug/Cable Mount Series 4 CH Fibre Optic Connector, 9/125, 1310/1550mm, MIL-TAC 5.5mm, Black Hard Anodised Aluminium Shell

Fibre Systems fibre optic adapters offer reliable performance with precision alignment sleeves. Housings come in various colours, with flange or flangeless options, metal clips and internal shutter for extra protection.

Fibre Systems CoreSpan™ Indoor/Outdoor LSZH distribution cables are designed for campus links between buildings where runs are short enough for installers to benefit from the lower termination costs of tight-buffered cable. For indoor use, the cable has an LSZH sheath.

Rackmount 1RU sliding enclosure LC Panels, Patch Configuration

The collapsible tripod design enables rapid folding for convenient transport, utilising pin latches attached to the base that secure it firmly in place. The axle is easily interchangeable and comes in sizes of 100, 300, and 500 metres.

D-Series 6F MM OM1 Ultra-Fox Plus™ Outdoor Military Tactical Bk

Rugged Tight Buffered fibre optic cable designed for the harshest environments, designed to survive severe crush, impact, vehicle run-over and deployment and retrieval conditions.

The OpticalCON system guarantees a safe, dust-protected and rugged connection. Features durable aramid yarn, all-metal housing and a spring-loaded push-pull locking mechanism.

AVP Maxxum LC Singlemode Duplex Blue, Fibre Optic Panel Mount Feed-thru, Blue, with Shutter, SC Footprint, Adapter Plate(s) and/or Hardware, Black and Blue MIS Colour-Code Caps included.  

The rear compatibility of opticalCON MTP^® 24 chassis fitting with standard MTP^® 24 (ELITE male with 20 N springforce) breakout cable allows easy adaptation to fibre standard connectors such as LC, SC, ST. The approved dust shutter ensures high mating cycles and minimal maintenance

Fibre Systems CoreSpan™ Indoor/Outdoor LSZH distribution cables are designed for campus links between buildings where runs are short enough for installers to benefit from the lower termination costs of tight-buffered cable. For indoor use, the cable has an LSZH sheath.