Fibre Systems FC Splice-On Connectors Provide Superior Performance; the weak point of other fusion splice-on connectors occurs when the shock absorber of the stop ring is sleeved by heat shrink after fusion splicing.
US Conec IBC™ single fibre cleaners can be used to effectively for SC, ST, FC, E2000 the most popular single fibre cleaner for SC, FC, ST and other 2.5mm based optical connectors
Fibre Systems Expanded Beam Tactical cable reels provide a simple solution for deploying and retrieving fibre optic and communication cables. Available in Multimode and Singlemode options allowing you to daisy chain your runs seamlessly.
OCC’s ruggedized ST connector and ST adapter products represent one of the best single-fibre connection systems available to industries where the ability to withstand extreme temperature change, shock, vibration, or corrosion is required. We offer both commercial-off-the-shelf (COTS) ST’s for harsh environment applications and the fully qualified, Military ST (MIL) that meets or exceeds 100% of the military specification MIL-DTL-83522E.
Fibre Systems fibre optic adapters offer reliable performance with precision alignment sleeves. Housings come in various colours, with flange or flangeless options, metal clips and internal shutter for extra protection.
AVP Maxxum LC/APC Singlemode Duplex Green, Fibre Optic Panel Mount Feed-thru, Green, SC Footprint, Adapter Plate(s) and/or Hardware, Black and Green MIS Colour-Code Caps included.
Fibre Systems fibre optic adapters offer reliable performance with precision alignment sleeves. Housings come in various colours, with flange or flangeless options, metal clips and internal shutter for extra protection.
Fibre Systems provides US Conec connector packages, based on standardised and custom optical interconnect ferrules. All designs are screened and qualified to Australian standards.
AVP Maxxum ST Multimode Duplex, OM1/2/3/4 (Metallic) Fibre Optic Panel Mount Feed-thru. Adapter Plate(s) and/or Hardware. Includes MIS Colour-Code Caps; Black, Beige, Aqua & Magenta
Beetek HDMI Fibre Extender is designed particularly for the rental & staging industry considering various parameters. The device can support resolution up to 4K@30 4:4:4 at 10.2 Gbps transmission rate. It uses single core Singlemode or OM3 fibre technology and support distance up to 300 metres. The device supports 40 dB input balancing at the TX to compensate for the loss generated by cable from the source to the TX. Built in EDID simulation and EDID learning support. The HDMI Extender support accurate pixel time reconstruction and provides no delay and no compression during the transmission. The device is carefully designed with protective enclosure for fibre interface and it is dust proof. It has rear long screws to support portable installation, locking power supplies and improved electrostatic protection. The product is suitable for Rental and Live Events.
The rear compatibility of opticalCON MTP® 24 chassis fitting with standard MTP® 24 (ELITE male with 20 N springforce) breakout cable allows easy adaptation to fibre standard connectors such as LC, SC, ST. The approved dust shutter ensures high mating cycles and minimal maintenance
Fibre Systems Pre-Terminated Cable Assemblies deliver custom, high-performance solutions for any fibre installation. With options like Indoor/Outdoor, Tactical Tight Buffer, Loose Tube and Micro Cable, these assemblies suit both ISP and OSP environments. Pre-terminated cables minimise setup time and costs, making them ideal when fast installation is required or on-site terminations aren’t possible. Download our datasheet and use our ordering guide to get a quote.
Rugged Tight Buffered fibre optic cable designed for the harshest environments, designed to survive severe crush, impact, vehicle run-over and deployment and retrieval conditions.
Fibre Systems fibre optic adapters offer reliable performance with precision alignment sleeves. Housings come in various colours, with flange or flangeless options, metal clips and internal shutter for extra protection.
Fibre Systems fibre optic adapters offer reliable performance with precision alignment sleeves. Housings come in various colours, with flange or flangeless options, metal clips and internal shutter for extra protection.
The DF200 is a cable winder specifically engineered for the rental and staging industry. It is available in multiple colour options to enable clear cable type differentiation, with custom labelling available for easy identification. Matching aluminium alloy connector protective sleeves are provided based on the cable type used. Lightweight in design, the DF200 accommodates up to 250 metres of optical fibre cable or 150 metres of network cable
